Brush-on Glazes
The FULL PRICE is as listed with only delivery charges to be added.

Postage and packaging is charged AT COST only.

email hesketh

For price comparisons with other sites, remember to factor in the impact of VAT and Delivery.


Link icon
Duncan Art
 Duncan Art brush-on glaze, product summary
A range of low solubility speckled brush-on glazes with a firing range between 1000 and 1020 deg C.

For best results, apply 3 even coats to bisque allowing the glaze to dry between the coats. The samples show the results we achieved on both light coloured and red clay and were all fired at 1040 deg C in an electric kiln.

NOT FOOD SAFE.

Details of sample preparation
The glaze samples are based on a 4cm square tile of a pale clay.
A diagonal stripe of red slip was then applied to simulate the effect on red clay.
The red clay is always shown in the bottom right hand corner.
For matt finishes, a clear glaze was applied on an opposite diagonal.

EARTHENWARE - We poured P1616 Casting slip into a tile mould and when dry brushed on 2 coats of UG38 Light Brown Contem underglaze with a hake, on the right hand diagonal to represent red coloured clay and   biscuit fired to 1000 deg cent.  We brushed on 3 coats of the glaze with a hake and re-fired to 1040 deg cent. in an electric kiln.

EXCLUDING AMACO CRYSTALTEX & DUNCAN ENVISION, CRYSTAL AND CRACKLES WHERE MANUFACTURERS SAMPLES ARE USED.


Safety Data - fact sheets are available for one or more of these product items view factsheet list